 |
|||||||||
|---|---|---|---|---|---|---|---|---|---|
|
|||||||||
| Valve Manifolds : | |||||||||||||||||||||||||
| Features/Benefits | |||||||||||||||||||||||||
| Forged one piece body construction (no |
- | For High strength | |||||||||||||||||||||||
| welding) | |||||||||||||||||||||||||
| Non Rotating Vee | - | which forms a bearing joint with the stem eliminates rotation between plug & seat at |
|||||||||||||||||||||||
| closure. This prevents scoring and galling up the valve seat and ensure long life in | |||||||||||||||||||||||||
| repetitive shut off service. | |||||||||||||||||||||||||
| Safety Bonnet Lock | - | Prevents accidental disassembly. |
|||||||||||||||||||||||
| Stem thread Rolled & Hard Plated | - | Provides additional strength & maximum service life. |
|||||||||||||||||||||||
| Mirror Finish Stem, burnished to a 16RMS | - | Extends packing life and smoothens stem operation. | |||||||||||||||||||||||
| Adjustable Packing Below Stem threads | - | Prevents stem lubrication washout and isolates threads from process contamination. |
|||||||||||||||||||||||
| Safety Back Seating | - | Provides secondary stem seal in full open position, prevents stem blowout. |
|||||||||||||||||||||||
| Stainless Steel Handle | - | For proper actuation. | |||||||||||||||||||||||
| Body to Bonnet seal | - | Metal to Metal constant compression, Isolates bonnet threads from system fluids and |
|||||||||||||||||||||||
| eliminates possible tensile. | |||||||||||||||||||||||||
| Dust Cap | - | Prevents contamination and lubricant washout out of bonnet assembly |
|||||||||||||||||||||||
| VALVE MANIFOLDS | |||||||||||||||||||||||||
Techno Flow range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and |
|||||||||||||||||||||||||
gaseous media. They are ruggedly manufactured and precision machined to the most exacting dimensional tolerance to ensure perfect |
|||||||||||||||||||||||||
| installation and application Valve Manifolds are functionally installed to control, measure , isolate , equalize , calibrate, drain, vent or | |||||||||||||||||||||||||
differentiate the pressure of liquids and gases. |
|||||||||||||||||||||||||
Techno Flow Valve manifolds series offer 2, 3 and 5 valves configurations which come in remote mountingìRî Type ( Pipe to Pipe ), direct |
|||||||||||||||||||||||||
| mounting ìTî & ìHî type(Pipe to Flange & Flange to Flange ) onto the instrument on |
|||||||||||||||||||||||||
| 2-1/8î (54mm) centre. | |||||||||||||||||||||||||
| Pressure Rating:- | |||||||||||||||||||||||||
|
|||||||||||||||||||||||||
| Manifold Selection:- | |||||||||||||||||||||||||
| Pressure and temperature rating are selected from ANSI B16.34 for class valve based on ANSI B16-Class 2500. Optional sour gas service |
|||||||||||||||||||||||||
| confirms to NACE STD MR-01-75. | |||||||||||||||||||||||||
| Testing:- | |||||||||||||||||||||||||
| Each valve is tested with nitrogen gas at 1000 psi for seat and packing leakage with a maximum allowable leack rate of 0.1 sec/min |
|||||||||||||||||||||||||
| Hydro test performanced with pure water at 1 and 1/2 times of working pressur. Other tests like vibration, temperatures, helium etc are | |||||||||||||||||||||||||
| available upon requests. | |||||||||||||||||||||||||
| Next | |||||||||||||||||||||||||